This silicone-free, anhydrous foundation and concealer stick formulation glides on the skin with a powdery smooth feel providing flawless coverage, exceptional feel and oil control. Cetiol®C5 and Cetiol® Sensoft light emollients replace silicone.
| Sequence | Trade Name | INCI Name | % |
| Phase A | Cetiol® C5 | Coco Caprylate | 20.4 |
| Cetiol® Sensoft | Propylheptyl Caprylate | 17.0 | |
| Titanium Dioxide, Disodium Stearoyl Glutamate, Alumnium Hydroxide |
7.0 | ||
| Iron Oxides, Disodium Stearoyl Glutamate, Alumnium Hydroxide |
0.1 | ||
| Iron Oxides, Disodium Stearoyl Glutamate, Alumnium Hydroxide |
0.7 | ||
| Iron Oxides, Disodium Stearoyl Glutamate, Alumnium Hydroxide |
0.3 | ||
| Phase B | Lanette® O | Cetearyl Alcohol | 5.0 |
| Hydrogenated Castor Oil | 6.0 | ||
| Cutina® PES | Pentaerythrityl Distearate | 4.0 | |
| Dehymuls® PGPH | Polyglyceryl-2 Dipolyhydroxystearate | 1.0 | |
| Brassica Campestris (Rapeseed) Sterols (and) Cetearyl Alcohol | 2.0 | ||
| Phase C | Talc | 29.8 | |
| Aluminum Starch Ocetnylsuccinate | 3.0 | ||
| Phase D | 3.0 | ||
| Triclosan (and) Butylparaben | 0.2 | ||
| Phase E | Fragrance | 0.5 |
PROCEDURE:
- Disperse pigments in the oils of Phase A (with high shear mixing or using shaker 2-5 cycles (10 min each)), add Phase B, and heat both phases together up to 85°C with high shear mixing.
- Disperse Phase C with vigorous mixing while maintaining the temperature at 85°C. After it becomes homogenous add ingredients in Phase D (one at a time) with high shear mixing.
- Start to cool down the batch with high shear mixing.
- Add Phase V while temperature drops to below 65°C with high shear mixing.
- Then pour the batch into the container while temperature is around 60°C.
