Remember the goal and keep your skin happy with this novel soothing caviar gel, made possible by the use of Hydagen® 558 P, an algae extract that helps deliver this unique texture. Dermagenist™ and red algae extract, Osmogeline™, enhances overall skin tone, relaxes stressed skin, and minimizes early signs of aging. Wise decisions don’t have to come from a wise face. Apply the caviar like ampoules to your palm, break in hand, and then massage into face for a relaxing silky feeling that can only leave you wanting more.
Ampoule/caviar Formula
| Sequence | Trade Name | INCI Name | % |
| A | Water, demin. | 80.90 | |
| Edeta® BD |
Disodium EDTA
|
0.05 | |
| Dermagenist™ PW BC10004 | Origanum Majorana Leaf Extract (and) Maltodextrin | 0.40 | |
| Osmogeline™ | Water (and) Algae Extract (and) Citric Acid | 3.00 | |
| Hispagel® 200 NS | Glycerin (and) Glyceryl Polyacrylate | 10.00 | |
| B | Hydagen® 558 P | Algin | 1.00 |
| Glycerin | 3.00 | ||
| C | Eumulgin® HPS | Coceth-7 (and) PPG-1-PEG-9 Lauryl Glycol Ether (and) PEG-40 Hydrogenated Castor Oil | 0.30 |
| Fragrance | 0.10 | ||
| D | Cloisonné® Gold 222C | Mica (and) Titanium Dioxide (and) Iron Oxides | 0.25 |
| Phenoxyethanol (and) Benzyl Alcohol (and) Ethylhexylglycerin | 1.00 |
Formula No. SC-US-17-34324-127
PROCEDURE:
Ampoule/caviar preparation
- Combine phase A ingredients one at a time until uniform with propeller mixing.
- Pre-mix phase B, add to A, mix until uniform.
- Pre-mix phase C, add to A/B, mix until uniform.
- Add phase D ingredients one at a time, mix until uniform.
Gel Formula to Hold Ampoules
| Sequence | Trade Name | INCI Name | % |
| Water, Deionized | 93.45 | ||
| Edeta® BD |
Disodium EDTA
|
0.20 | |
| Glycerin | 3.00 | ||
| Tinovis GTC UP | 1.50 | ||
| Phenoxyethanol (and) Benzyl Alcohol (and) Ethylhexylglycerin | 1.00 | ||
| NaOH 25% soln. | 0.75 |
Formula No. SC-US-17-34324-128
PROCEDURE:
Combine phase A ingredients one at a time. Add phase B, neutralize until clear, adjust pH to about 6.5 Stability.
Ampoule/caviar in Gel
- Prepare 1% calcium chloride solution and mix with stir bar. Then slow down stir bar mixing to low speed (note, slow speed will allow formation of perfectly round and more stable ampoules).
- Using plastic pipette (3mL graduated, 7mL) start dropping drops of gel into slow mixing CaCl2 solution from a height of about 24 inches, mix for 1 minute and 30 seconds.
- Immediately pour solution into an empty beaker, using a strainer/drainer to capture the ampoules.
- Gently rinse ampoules in deionized water for 20 seconds.
- Remove excess water by touching bottom of drainer with a paper towel.
- Put the ampoules in a jar containing the gel formula SC-US-17-34324-128, to suspend and stabilize the ampoules.
