As the impurities have been cleansed, it is time to replenish. Don’t rush into things too quickly, and make sure to prep the skin for serums and moisturizers with a light spritz featuring our Herbalis® W Rose Water. Feel your skin soften and tighten as it dries, leaving you with a toned complexion and no sticky residue. Mat-XS™ Clinical further refines the skin texture and reduces any oiliness to the skin. Think of this as stretching, or a way to ease yourself into a workout, and let the moisturizing begin.
| Sequence | Trade Name | INCI Name | % |
| A | Water, demin. | 86.53 | |
| Edeta® BD |
Disodium EDTA
|
0.05 | |
| B | Ethanol | 5.00 | |
| Pluracare E 400 NF | PEG-8 | 3.00 | |
| Phenoxyethanol (and) Ethylhexylglycerin | 1.10 | ||
| Sodium Benzotriazolyl Butylphenol Sulfonate (and) Buteth-3 (and) Tributyl Citrate | 0.10 | ||
| Eumulgin® HPS | Coceth-7 (and) PPG-1-PEG-9 Lauryl Glycol Ether (and) PEG-40 Hydrogenated Castor Oil | 0.10 | |
| Fragrance | 0.05 | ||
| Vitamin E-Acetate Care | Tocopheryl Acetate | 0.02 | |
| C | Herbalis® W Rose Water | Aqua (and) Alcohol (and) Rosa Damascena Flower Oil | 2.00 |
| Mat-XS™ Clinical A00098 | Water (and) Butylene Glycol (and) Sarcosine (and) Xanthan Gum | 2.00 | |
| Red 40 (1% solution) | Red 40 | 0.01 | |
| Sodium Hydroxide (5% solution) | 0.04 |
Formula No. SC-US-17-31208-63
PROCEDURE:
- Add phase A ingredients to main beaker under prop mix. Mix until clear.
- Pre-mix phase B in a side beaker and add SLOWLY to phase A in the main beaker under prop mix or low speed (<1000 rpm) homogenization. Care should be taken to minimize air incorporation. Phase AB should be completely clear when combined.
- Move to a prop blade and add Phase C, one ingredient at a time until uniform. Minimize air.
